Insulated Cover for Kampa Roly Poly


Category: SKU: insulaqua-1

Product Description

AS FEATURED IN “PRACTICAL CARAVAN MAGAZINE” & “CARAVAN BUYER MAGAZINE”. – See the insulated cover review article by following the highlighted link at the bottom of this text.

This insulated cover is made by ourselves and is not available from other retailers.

Our insulation is of superior performance to most other products available currently.

This Insulated Aquaroll Cover will keep your water running at much lower temperatures by dramatically reducing the risk of Freezing.

Designed to fit the Kampa Roly Poly
This is a 3 piece insulated padded system for your Aquaroll, which has a seperate insulated padded bottom pad, insulated padded jacket cover and then the padded pipe insulation cover also.
With the use of Velcro fastenings it is the easiest insulated cover to fit onto your aquaroll.
Because the bottom insulating pad is flat, THERE IS NO NEED TO LIFT A FULL AQUAROLL AT ALL WITH THIS PRODUCT!!!!!!!

NOW AVAILABLE WITH OR WITHOUT A MAINS ADAPTER INLET SLOT!!! The mains inlet slot is used for the Aquaroll Mains Adapter when you have a water supply on your Pitch.

You can be sure that when our Cover is fitted to your Aquaroll you will have a much better chance of having running water in the morning, after a cold night.

Caravan Magazine Test

In one test by Caravan Magazine they said:- “Then we went to the car, to check the exact temperature, which was not the -5º that had been forecast, but -8º. The insulating jacket, we decided, had proved its worth!”

See the link below for an independent review of our padded insulated cover –


Heavy Duty Material

This 600 dernier (twice the strength of 300d) fabric is a tough strong & rip resistant fabric.
It is ‘Polyester’ based with a fully waterproof backing.
The outer is treated to make it stain resistant.
Bags and covers in this fabric offer the ultimate in storage protection.

Standard Duty

This superb fabric provides for a good compromise, being lightweight yet reasonably strong, whilst still offering fabulous storage protection.
It is ‘Nylon’ based with a fully waterproof backing.
This fabric has a smooth finish.

Padded Bag Materials

For our padded bags, we use 3 layers of material.
Outer material – Heavy Duty.
Middle material -10 or 20mm padded insulating foam (thickness depends upon product).
Inner material – Standard Duty.
This ensures a high level of protection for the internal items whilst reducing the risk of scratching and no fluffly liners to cause a “lint” fluff problem.

Additional Information


Blue, Burgundy, Green, Silver / Grey

Cover Type

Standard Type, With Mains Inlet Slot